Section 15: Base Metals and Articles of Base Metal
Chapter 74: Chapter 74
121 tariff codes in this chapter
| HTS Code | Description | General Rate |
|---|---|---|
| 7401.00.00 | Copper mattes; cement copper (precipitated copper) | Free |
| 7402.00.00 | Unrefined copper; copper anodes for electrolytic refining | Free |
| 7403 | Refined copper and copper alloys, unwrought (other than master alloys of heading 7405): | — |
| 7403.11.00 | Cathodes and sections of cathodes | 1% |
| 7403.12.00 | Wire bars | 1% |
| 7403.13.00 | Billets | 1% |
| 7403.19.00 | Other | 1% |
| 7403.21.00 | Copper-zinc base alloys (brass) | 1% |
| 7403.22.00 | Copper-tin base alloys (bronze) | 1% |
| 7403.29.01 | Other copper alloys | 1% |
| 7404.00 | Copper waste and scrap: | — |
| 7404.00.30 | Spent anodes; waste and scrap with a copper content of less than 94 percent by weight | Free |
| 7404.00.60 | Other | Free |
| 7405.00 | Master alloys of copper: | — |
| 7405.00.10 | Containing by weight 5 percent or more but not more than 15 percent of phosphorus | Free |
| 7405.00.60 | Other | Free |
| 7406 | Copper powders and flakes: | — |
| 7406.10.00 | Powders of non-lamellar structure | Free |
| 7406.20.00 | Powders of lamellar structure; flakes | Free |
| 7407 | Copper bars, rods and profiles: | — |
| 7407.10 | Of refined copper: | — |
| 7407.10.15 | Hollow profiles | 3% |
| 7407.10.30 | Other | 3% |
| 7407.10.50 | Bars and rods | 1% |
| 7407.21 | Of copper-zinc base alloys (brass): | — |
| 7407.21.15 | Hollow profiles | 2.2% |
| 7407.21.30 | Other | 2.2% |
| 7407.21.50 | Low fuming brazing rods | 2.2% |
| 7407.21.70 | Having a rectangular cross section | 1.9% |
| 7407.21.90 | Other | 2.2% |
| 7407.29 | Other: | — |
| 7407.29.16 | Hollow | 3% |
| 7407.29.34 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% |
| 7407.29.38 | Other | 3% |
| 7407.29.40 | Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel ... | 3% |
| 7407.29.50 | Other bars and rods | 1.6% |
| 7408 | Copper wire: | — |
| 7408.11 | Of which the maximum cross-sectional dimension exceeds 6 mm: | — |
| 7408.11.30 | With a maximum cross-sectional dimension over 9.5 mm | 1% |
| 7408.11.60 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | 3% |
| 7408.19.00 | Other | 3% |
| 7408.21.00 | Of copper-zinc base alloys (brass) | 3% |
| 7408.22 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver): | — |
| 7408.22.10 | Coated or plated with metal | 3% |
| 7408.22.50 | Not coated or plated with metal | 3% |
| 7408.29 | Other: | — |
| 7408.29.10 | Coated or plated with metal | 3% |
| 7408.29.50 | Not coated or plated with metal | 3% |
| 7409 | Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: | — |
| 7409.11 | In coils: | — |
| 7409.11.10 | Of a thickness of 5 mm or more | 3% |
| 7409.11.50 | Of a thickness of less than 5 mm | 1% |
| 7409.19 | Other: | — |
| 7409.19.10 | Of a thickness of 5 mm or more | 3% |
| 7409.19.50 | Of a width of 500 mm or more | 1% |
| 7409.19.90 | Of a width of less than 500 mm | 3% |
| 7409.21.00 | In coils | 1.9% |
| 7409.29.00 | Other | 1.9% |
| 7409.31 | In coils: | — |
| 7409.31.10 | Of a thickness of 5 mm or more | 3% |
| 7409.31.50 | Of a width of 500 mm or more | 1.7% |
| 7409.31.90 | Of a width of less than 500 mm | 3% |
| 7409.39 | Other: | — |
| 7409.39.10 | Of a thickness of 5 mm or more | 3% |
| 7409.39.50 | Of a width of 500 mm or more | 1.7% |
| 7409.39.90 | Of a width of less than 500 mm | 3% |
| 7409.40.00 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver) | 3% |
| 7409.90 | Of other copper alloys: | — |
| 7409.90.10 | Of a thickness of 5 mm or more | 3% |
| 7409.90.50 | Of a width of 500 mm or more | 1.7% |
| 7409.90.90 | Of a width of less than 500 mm | 3% |
| 7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing ma... | — |
| 7410.11.00 | Of refined copper | 1% |
| 7410.12.00 | Of copper alloys | 1% |
| 7410.21 | Of refined copper: | — |
| 7410.21.30 | Copper clad laminates | 3% |
| 7410.21.60 | Other | 1.5% |
| 7410.22.00 | Of copper alloys | 1.5% |
| 7411 | Copper tubes and pipes: | — |
| 7411.10 | Of refined copper: | — |
| 7411.10.10 | Seamless | 1.5% |
| 7411.10.50 | Other | 3% |
| 7411.21 | Of copper-zinc base alloys (brass): | — |
| 7411.21.10 | Seamless | 1.4% |
| 7411.21.50 | Other | 3% |
| 7411.22.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver) | 3% |
| 7411.29 | Other: | — |
| 7411.29.10 | Seamless | 1.4% |
| 7411.29.50 | Other | 3% |
| 7412 | Copper tube or pipe fittings (for example couplings, elbows, sleeves): | — |
| 7412.10.00 | Of refined copper | 3% |
| 7412.20.00 | Of copper alloys | 3% |
| 7413.00 | Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper,... | — |
| 7413.00.10 | Stranded wire | 3% |
| 7413.00.50 | Other | 2% |
| 7413.00.90 | Fitted with fittings or made up into articles | 3% |
| 7415 | Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copp... | — |
| 7415.10.00 | Nails and tacks, drawing pins, staples and similar articles | 2.5% |
| 7415.21.00 | Washers (including spring washers) | 3% |
| 7415.29.00 | Other | 3% |
| 7415.33 | Screws, bolts and nuts: | — |
| 7415.33.05 | Screws for wood | 3% |
| 7415.33.10 | Muntz or yellow metal bolts | 1.4% |
| 7415.33.80 | Other screws and bolts; nuts | 3% |
| 7415.39.00 | Other | 3% |
| 7418 | Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring o... | — |
| 7418.10.00 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing... | 3% |
| 7418.20 | Sanitary ware and parts thereof: | — |
| 7418.20.10 | Of copper-zinc base alloys (brass) | 3% |
| 7418.20.50 | Other | 3% |
| 7419 | Other articles of copper: | — |
| 7419.20.00 | Cast, molded, stamped or forged, but not further worked | Free |
| 7419.80 | Other: | — |
| 7419.80.03 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more w... | Free |
| 7419.80.06 | Other | 3% |
| 7419.80.09 | Other | 3% |
| 7419.80.15 | Containers of a kind normally carried on the person, in the pocket or in the handbag | 3% |
| 7419.80.16 | Copper springs | 3% |
| 7419.80.17 | Chain and parts thereof | 3% |
| 7419.80.30 | Coated or plated with precious metal | 3% |
| 7419.80.50 | Other | Free |
Check Chapter 74 Rates by Country
Duty rates for Chapter 74 products vary by country of origin. Select a country to see general and preferential rates.
Top Trading Partners
Guides & Resources
IEEPA Tariff Refund Calculator
Check if your imports qualify
How to File for an IEEPA Tariff Refund After the Supreme Court Ruling
Importing from China: Complete Tariff and Compliance Guide
Trade Agreements: How to Qualify for Preferential Tariff Rates
Non-Oriented Electrical Steel From China, Germany, Japan, South Korea, Sweden, and Taiwan; Scheduling of Expedited Five-Year Reviews
L-Lysine From China; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations
Chapter 74 FAQ
What products are covered by HTS Chapter 74?▶
Chapter 74 of the Harmonized Tariff Schedule covers chapter 74. It contains 121 tariff codes classifying specific products for US import duty purposes.
How many tariff codes are in Chapter 74?▶
Chapter 74 contains 121 tariff codes, of which 89 are classifiable (leaf) codes. 11 of these codes have a duty-free general rate.
What are the duty rates for Chapter 74 imports?▶
Duty rates in Chapter 74 (Chapter 74) vary by specific product classification and country of origin. General (MFN) rates apply to most countries, while preferential rates may be available under trade agreements like USMCA, GSP, or bilateral FTAs.