Section 15: Base Metals and Articles of Base Metal
Chapter 76: Chapter 76
94 tariff codes in this chapter
| HTS Code | Description | General Rate |
|---|---|---|
| 7601 | Unwrought aluminum: | — |
| 7601.10 | Aluminum, not alloyed: | — |
| 7601.10.30 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not ... | 2.6% |
| 7601.10.60 | Other | Free |
| 7601.20 | Aluminum alloys: | — |
| 7601.20.30 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not ... | 2.6% |
| 7601.20.60 | Containing 25 percent or more by weight of silicon | 2.1% |
| 7601.20.90 | Other | Free |
| 7602.00.00 | Aluminum waste and scrap | Free |
| 7603 | Aluminum powders and flakes: | — |
| 7603.10.00 | Powders of non-lamellar structure | 5% |
| 7603.20.00 | Powders of lamellar structure; flakes | 3.9% |
| 7604 | Aluminum bars, rods and profiles: | — |
| 7604.10 | Of aluminum, not alloyed: | — |
| 7604.10.10 | Profiles | 5% |
| 7604.10.30 | Having a round cross section | 2.6% |
| 7604.10.50 | Other | 3% |
| 7604.21.00 | Hollow profiles | 1.5% |
| 7604.29 | Other: | — |
| 7604.29.10 | Other profiles | 5% |
| 7604.29.30 | Having a round cross section | 2.6% |
| 7604.29.50 | Other | 3% |
| 7605 | Aluminum wire: | — |
| 7605.11.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% |
| 7605.19.00 | Other | 4.2% |
| 7605.21.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% |
| 7605.29.00 | Other | 4.2% |
| 7606 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm: | — |
| 7606.11 | Of aluminum, not alloyed: | — |
| 7606.11.30 | Not clad | 3% |
| 7606.11.60 | Clad | 2.7% |
| 7606.12 | Of aluminum alloys: | — |
| 7606.12.30 | Not clad | 3% |
| 7606.12.60 | Clad | 6.5% |
| 7606.91 | Of aluminum, not alloyed: | — |
| 7606.91.30 | Not clad | 3% |
| 7606.91.60 | Clad | 2.7% |
| 7606.92 | Of aluminum alloys: | — |
| 7606.92.30 | Not clad | 3% |
| 7606.92.60 | Clad | 6.5% |
| 7607 | Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing... | — |
| 7607.11 | Rolled but not further worked: | — |
| 7607.11.30 | Of a thickness not exceeding 0.01 mm | 5.8% |
| 7607.11.60 | Of a thickness exceeding 0.01 mm | 5.3% |
| 7607.11.90 | Other | 3% |
| 7607.19 | Other: | — |
| 7607.19.10 | Etched capacitor foil | 5.3% |
| 7607.19.30 | Cut to shape, of a thickness not exceeding 0.15 mm | 5.7% |
| 7607.19.60 | Other | 3% |
| 7607.20 | Backed: | — |
| 7607.20.10 | Covered or decorated with a character, design, fancy effect or pattern | 3.7% |
| 7607.20.50 | Other | Free |
| 7608 | Aluminum tubes and pipes: | — |
| 7608.10.00 | Of aluminum, not alloyed | 5.7% |
| 7608.20.00 | Of aluminum alloys | 5.7% |
| 7609.00.00 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) | 5.7% |
| 7610 | Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for... | — |
| 7610.10.00 | Doors, windows and their frames and thresholds for doors | 5.7% |
| 7610.90.00 | Other | 5.7% |
| 7611.00.00 | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or ... | 2.6% |
| 7612 | Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular co... | — |
| 7612.10.00 | Collapsible tubular containers | 2.4% |
| 7612.90 | Other: | — |
| 7612.90.10 | Of a capacity not exceeding 20 liters | 5.7% |
| 7612.90.50 | Other | Free |
| 7613.00.00 | Aluminum containers for compressed or liquefied gas | 5% |
| 7614 | Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminu... | — |
| 7614.10 | With steel core: | — |
| 7614.10.10 | Not fitted with fittings and not made up into articles | 4.9% |
| 7614.10.50 | Fitted with fittings or made up into articles | 4.9% |
| 7614.90 | Other: | — |
| 7614.90.20 | Electrical conductors | 4.9% |
| 7614.90.40 | Other | 4.9% |
| 7614.90.50 | Fitted with fittings or made up into articles | 5.7% |
| 7615 | Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring... | — |
| 7615.10 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing... | — |
| 7615.10.11 | Pot scourers and scouring or polishing pads, gloves and the like | 3.1% |
| 7615.10.20 | Cast | 3.1% |
| 7615.10.30 | Other | 3.1% |
| 7615.10.50 | Cast | 3.1% |
| 7615.10.71 | Other | 3.1% |
| 7615.10.91 | Other | 3.1% |
| 7615.20.00 | Sanitary ware and parts thereof | 3.8% |
| 7616 | Other articles of aluminum: | — |
| 7616.10 | Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, ... | — |
| 7616.10.10 | Nails, tacks and staples | 5.7% |
| 7616.10.30 | Rivets | 4.7% |
| 7616.10.50 | Cotters and cotter pins | 5.7% |
| 7616.10.70 | Having shanks, threads or holes over 6 mm in diameter | 5.5% |
| 7616.10.90 | Other | 6% |
| 7616.91.00 | Cloth, grill, netting and fencing, of aluminum wire | 2.5% |
| 7616.99 | Other: | — |
| 7616.99.10 | Luggage frames | Free |
| 7616.99.51 | Other | 2.5% |
Check Chapter 76 Rates by Country
Duty rates for Chapter 76 products vary by country of origin. Select a country to see general and preferential rates.
Top Trading Partners
Guides & Resources
IEEPA Tariff Refund Calculator
Check if your imports qualify
How to File for an IEEPA Tariff Refund After the Supreme Court Ruling
Importing from China: Complete Tariff and Compliance Guide
Trade Agreements: How to Qualify for Preferential Tariff Rates
Non-Oriented Electrical Steel From China, Germany, Japan, South Korea, Sweden, and Taiwan; Scheduling of Expedited Five-Year Reviews
L-Lysine From China; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations
Chapter 76 FAQ
What products are covered by HTS Chapter 76?▶
Chapter 76 of the Harmonized Tariff Schedule covers chapter 76. It contains 94 tariff codes classifying specific products for US import duty purposes.
How many tariff codes are in Chapter 76?▶
Chapter 76 contains 94 tariff codes, of which 65 are classifiable (leaf) codes. 6 of these codes have a duty-free general rate.
What are the duty rates for Chapter 76 imports?▶
Duty rates in Chapter 76 (Chapter 76) vary by specific product classification and country of origin. General (MFN) rates apply to most countries, while preferential rates may be available under trade agreements like USMCA, GSP, or bilateral FTAs.