Poland — Chapter 72: Chapter 72
US import tariff rates for Chapter 72 products originating from Poland.
Tariff Rates (331 codes)
| HTS Code | Description | General Rate | Preferential Rate |
|---|---|---|---|
| 7201 | Pig iron and spiegeleisen in pigs, blocks or other primary forms: | — | — |
| 7201.10.00 | Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus | Free | — |
| 7201.20.00 | Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus | Free | — |
| 7201.50 | Alloy pig iron; spiegeleisen: | — | — |
| 7201.50.30 | Alloy pig iron | Free | — |
| 7201.50.60 | Spiegeleisen | Free | — |
| 7202 | Ferroalloys: | — | — |
| 7202.11 | Containing by weight more than 2 percent of carbon: | — | — |
| 7202.11.10 | Containing by weight more than 2 percent but not more than 4 percent of carbon | 1.4% | — |
| 7202.11.50 | Containing by weight more than 4 percent of carbon | 1.5% | — |
| 7202.19 | Other: | — | — |
| 7202.19.10 | Containing by weight not more than 1 percent of carbon | 2.3% | — |
| 7202.19.50 | Containing by weight more than 1 percent but not more than 2 percent of carbon | 1.4% | — |
| 7202.21 | Containing by weight more than 55 percent of silicon: | — | — |
| 7202.21.10 | Containing by weight more than 3 percent of calcium | 1.1% | — |
| 7202.21.50 | Other | 1.5% | — |
| 7202.21.75 | Containing by weight more than 80 percent but not more than 90 percent of silico... | 1.9% | — |
| 7202.21.90 | Containing by weight more than 90 percent of silicon | 5.8% | — |
| 7202.29.00 | Other | Free | — |
| 7202.30.00 | Ferrosilicon manganese | 3.9% | — |
| 7202.41.00 | Containing by weight more than 4 percent of carbon | 1.9% | — |
| 7202.49 | Other: | — | — |
| 7202.49.10 | Containing by weight more than 3 percent of carbon | 1.9% | — |
| 7202.49.50 | Other | 3.1% | — |
| 7202.50.00 | Ferrosilicon chromium | 10% | — |
| 7202.60.00 | Ferronickel | Free | — |
| 7202.70.00 | Ferromolybdenum | 4.5% | — |
| 7202.80.00 | Ferrotungsten and ferrosilicon tungsten | 5.6% | — |
| 7202.91.00 | Ferrotitanium and ferrosilicon titanium | 3.7% | — |
| 7202.92.00 | Ferrovanadium | 4.2% | — |
| 7202.93 | Ferroniobium: | — | — |
| 7202.93.40 | Containing by weight less than 0.02 percent of phosphorus or sulfur or less than... | 5% | — |
| 7202.93.80 | Other | 5% | — |
| 7202.99 | Other: | — | — |
| 7202.99.10 | Ferrozirconium | 4.2% | — |
| 7202.99.20 | Calcium silicon | 5% | — |
| 7202.99.80 | Other | 5% | — |
| 7203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferro... | — | — |
| 7203.10.00 | Ferrous products obtained by direct reduction of iron ore | Free | — |
| 7203.90.00 | Other | Free | — |
| 7204 | Ferrous waste and scrap; remelting scrap ingots of iron or steel: | — | — |
| 7204.10.00 | Waste and scrap of cast iron | Free | — |
| 7204.21.00 | Of stainless steel | Free | — |
| 7204.29.00 | Other | Free | — |
| 7204.30.00 | Waste and scrap of tinned iron or steel | Free | — |
| 7204.41.00 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampi... | Free | — |
| 7204.49.00 | Other | Free | — |
| 7204.50.00 | Remelting scrap ingots | Free | — |
| 7205 | Granules and powders, of pig iron, spiegeleisen, iron or steel: | — | — |
| 7205.10.00 | Granules | Free | — |
| 7205.21.00 | Of alloy steel | Free | — |
| 7205.29.00 | Other | Free | — |
| 7206 | Iron and nonalloy steel in ingots or other primary forms (excluding iron of head... | — | — |
| 7206.10.00 | Ingots | Free | — |
| 7206.90.00 | Other | Free | — |
| 7207 | Semifinished products of iron or nonalloy steel: | — | — |
| 7207.11.00 | Of rectangular (including square) cross section, the width measuring less than t... | Free | — |
| 7207.12.00 | Other, of rectangular (other than square) cross section | Free | — |
| 7207.19.00 | Other | Free | — |
| 7207.20.00 | Containing by weight 0.25 percent or more of carbon | Free | — |
| 7208 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, ho... | — | — |
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief: | — | — |
| 7208.10.15 | Pickled | Free | — |
| 7208.10.30 | Of a thickness of 4.75 mm or more | Free | — |
| 7208.10.60 | Of a thickness of less than 4.75 mm | Free | — |
| 7208.25 | Of a thickness of 4.75 mm or more: | — | — |
| 7208.25.30 | Of high-strength steel | Free | — |
| 7208.25.60 | Other | Free | — |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — |
| 7208.27.00 | Of a thickness of less than 3 mm | Free | — |
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | — |
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | — |
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — |
| 7208.39.00 | Of a thickness of less than 3 mm | Free | — |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief: | — | — |
| 7208.40.30 | Of a thickness of 4.75 mm or more | Free | — |
| 7208.40.60 | Of a thickness of less than 4.75 mm | Free | — |
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | — |
| 7208.52.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | — |
| 7208.53.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — |
| 7208.54.00 | Of a thickness of less than 3 mm | Free | — |
| 7208.90.00 | Other | Free | — |
| 7209 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, co... | — | — |
| 7209.15.00 | Of a thickness of 3 mm or more | Free | — |
| 7209.16.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | — |
| 7209.17.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free | — |
| 7209.18 | Of a thickness of less than 0.5 mm: | — | — |
| 7209.18.15 | Of high-strength steel | Free | — |
| 7209.18.25 | Of a thickness of less than 0.361 mm (blackplate) | Free | — |
| 7209.18.60 | Other | Free | — |
| 7209.25.00 | Of a thickness of 3 mm or more | Free | — |
| 7209.26.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | — |
| 7209.27.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free | — |
| 7209.28.00 | Of a thickness of less than 0.5 mm | Free | — |
| 7209.90.00 | Other | Free | — |
| 7210 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cl... | — | — |
| 7210.11.00 | Of a thickness of 0.5 mm or more | Free | — |
| 7210.12.00 | Of a thickness of less than 0.5 mm | Free | — |
| 7210.20.00 | Plated or coated with lead, including terne-plate | Free | — |
| 7210.30.00 | Electrolytically plated or coated with zinc | Free | — |
| 7210.41.00 | Corrugated | Free | — |
| 7210.49.00 | Other | Free | — |
| 7210.50.00 | Plated or coated with chromium oxides or with chromium and chromium oxides | Free | — |
| 7210.61.00 | Plated or coated with aluminum-zinc alloys | Free | — |
| 7210.69.00 | Other | Free | — |
| 7210.70 | Painted, varnished or coated with plastics: | — | — |
| 7210.70.30 | Not coated or plated with metal and not clad | Free | — |
| 7210.70.60 | Other | Free | — |
| 7210.90 | Other: | — | — |
| 7210.90.10 | Clad | Free | — |
| 7210.90.60 | Electrolytically coated or plated with base metal | Free | — |
| 7210.90.90 | Other | Free | — |
| 7211 | Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, ... | — | — |
| 7211.13.00 | Universal mill plate | Free | — |
| 7211.14.00 | Other, of a thickness of 4.75 mm or more | Free | — |
| 7211.19 | Other: | — | — |
| 7211.19.15 | Of high-strength steel | Free | — |
| 7211.19.20 | Of a thickness exceeding 1.25 mm | Free | — |
| 7211.19.30 | Other | Free | — |
| 7211.19.45 | Of high-strength steel | Free | — |
| 7211.19.60 | Pickled | Free | — |
| 7211.19.75 | Other | Free | — |
| 7211.23 | Containing by weight less than 0.25 percent of carbon: | — | — |
| 7211.23.15 | Of high-strength steel | Free | — |
| 7211.23.20 | Other | Free | — |
| 7211.23.30 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | — |
| 7211.23.45 | Of a thickness not exceeding 0.25 mm | Free | — |
| 7211.23.60 | Other | Free | — |
| 7211.29 | Other: | — | — |
| 7211.29.20 | Of a thickness exceeding 0.25 mm | Free | — |
| 7211.29.45 | Other | Free | — |
| 7211.29.60 | Other | Free | — |
| 7211.90.00 | Other | Free | — |
| 7212 | Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, ... | — | — |
| 7212.10.00 | Plated or coated with tin | Free | — |
| 7212.20.00 | Electrolytically plated or coated with zinc | Free | — |
| 7212.30 | Otherwise plated or coated with zinc: | — | — |
| 7212.30.10 | Of a thickness exceeding 0.25 mm or more | Free | — |
| 7212.30.30 | Other | Free | — |
| 7212.30.50 | Other | Free | — |
| 7212.40 | Painted, varnished or coated with plastics: | — | — |
| 7212.40.10 | Of a width of less than 300 mm | Free | — |
| 7212.40.50 | Other | Free | — |
| 7212.50.00 | Otherwise plated or coated | Free | — |
| 7212.60.00 | Clad | Free | — |
| 7213 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel... | — | — |
| 7213.10.00 | Concrete reinforcing bars and rods | Free | — |
| 7213.20.00 | Other, of free-cutting steel | Free | — |
| 7213.91 | Of circular cross section measuring less than 14 mm in diameter: | — | — |
| 7213.91.30 | Not tempered, not treated and not partly manufactured | Free | — |
| 7213.91.45 | Containing by weight 0.6 percent or more of carbon | Free | — |
| 7213.91.60 | Other | Free | — |
| 7213.99.00 | Other | Free | — |
| 7214 | Other bars and rods of iron or nonalloy steel, not further worked than forged, h... | — | — |
| 7214.10.00 | Forged | Free | — |
| 7214.20.00 | Concrete reinforcing bars and rods | Free | — |
| 7214.30.00 | Other, of free-cutting steel | Free | — |
| 7214.91.00 | Of rectangular (other than square) cross-section | Free | — |
| 7214.99.00 | Other | Free | — |
| 7215 | Other bars and rods of iron or nonalloy steel: | — | — |
| 7215.10.00 | Of free-cutting steel, not further worked than cold-formed or cold-finished | Free | — |
| 7215.50.00 | Other, not further worked than cold-formed or cold-finished | Free | — |
| 7215.90 | Other: | — | — |
| 7215.90.10 | Not cold-formed | Free | — |
| 7215.90.30 | Cold-formed | Free | — |
| 7215.90.50 | Other | Free | — |
| 7216 | Angles, shapes and sections of iron or nonalloy steel: | — | — |
| 7216.10.00 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, o... | Free | — |
| 7216.21.00 | L sections | Free | — |
| 7216.22.00 | T sections | Free | — |
| 7216.31.00 | U sections | Free | — |
| 7216.32.00 | I sections (standard beams) | Free | — |
| 7216.33.00 | H sections | Free | — |
| 7216.40.00 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a... | Free | — |
| 7216.50.00 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn... | Free | — |
| 7216.61.00 | Obtained from flat-rolled products | Free | — |
| 7216.69.00 | Other | Free | — |
| 7216.91.00 | Cold-formed or cold-finished from flat-rolled products | Free | — |
| 7216.99.00 | Other | Free | — |
| 7217 | Wire of iron or nonalloy steel: | — | — |
| 7217.10 | Not plated or coated, whether or not polished: | — | — |
| 7217.10.10 | Of a thickness not exceeding 0.25 mm | Free | — |
| 7217.10.20 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | — |
| 7217.10.30 | Of a thickness exceeding 1.25 mm | Free | — |
| 7217.10.40 | With a diameter of less than 1.5 mm | Free | — |
| 7217.10.50 | With a diameter of 1.5 mm or more | Free | — |
| 7217.10.60 | Other wire | Free | — |
| 7217.10.70 | Flat wire | Free | — |
| 7217.10.80 | Round wire | Free | — |
| 7217.10.90 | Other wire | Free | — |
| 7217.20 | Plated or coated with zinc: | — | — |
| 7217.20.15 | Flat wire | Free | — |
| 7217.20.30 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percen... | Free | — |
| 7217.20.45 | Other | Free | — |
| 7217.20.60 | Containing by weight less than 0.25 percent of carbon | Free | — |
| 7217.20.75 | Other | Free | — |
| 7217.30 | Plated or coated with other base metals: | — | — |
| 7217.30.15 | Flat wire | Free | — |
| 7217.30.30 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percen... | Free | — |
| 7217.30.45 | Other | Free | — |
| 7217.30.60 | Containing by weight less than 0.25 percent of carbon | Free | — |
| 7217.30.75 | Other | Free | — |
| 7217.90 | Other: | — | — |
| 7217.90.10 | Coated with plastics | Free | — |
| 7217.90.50 | Other | Free | — |
| 7218 | Stainless steel in ingots or other primary forms; semi-finished products of stai... | — | — |
| 7218.10.00 | Ingots and other primary forms | Free | — |
| 7218.91.00 | Of rectangular (other than square) cross-section | Free | — |
| 7218.99.00 | Other | Free | — |
| 7219 | Flat-rolled products of stainless steel, of a width of 600 mm or more: | — | — |
| 7219.11.00 | Of a thickness exceeding 10 mm | Free | — |
| 7219.12.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | — |
| 7219.13.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — |
| 7219.14.00 | Of a thickness of less than 3 mm | Free | — |
| 7219.21.00 | Of a thickness exceeding 10 mm | Free | — |
| 7219.22.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | — |
| 7219.23.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — |
| 7219.24.00 | Of a thickness of less than 3 mm | Free | — |
| 7219.31.00 | Of a thickness of 4.75 mm or more | Free | — |
| 7219.32.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | — |
| 7219.33.00 | Of a thickness exceeding 1 mm but less than 3 mm | Free | — |
| 7219.34.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | Free | — |
| 7219.35.00 | Of a thickness of less than 0.5 mm | Free | — |
| 7219.90.00 | Other | Free | — |
| 7220 | Flat-rolled products of stainless steel, of a width of less than 600 mm: | — | — |
| 7220.11.00 | Of a thickness of 4.75 mm or more | Free | — |
| 7220.12 | Of a thickness of less than 4.75 mm: | — | — |
| 7220.12.10 | Of a width of 300 mm or more | Free | — |
| 7220.12.50 | Of a width of less than 300 mm | Free | — |
| 7220.20 | Not further worked than cold-rolled (cold-reduced): | — | — |
| 7220.20.10 | Of a width of 300 mm or more | Free | — |
| 7220.20.60 | Of a thickness exceeding 1.25 mm | Free | — |
| 7220.20.70 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | Free | — |
| 7220.20.80 | Razor blade steel | Free | — |
| 7220.20.90 | Other | Free | — |
| 7220.90.00 | Other | Free | — |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | Free | — |
| 7222 | Other bars and rods of stainless steel; angles, shapes and sections of stainless... | — | — |
| 7222.11.00 | Of circular cross-section | Free | — |
| 7222.19.00 | Other | Free | — |
| 7222.20.00 | Bars and rods, not further worked than cold-formed or cold-finished | Free | — |
| 7222.30.00 | Other bars and rods | Free | — |
| 7222.40 | Angles, shapes and sections: | — | — |
| 7222.40.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | — |
| 7222.40.60 | Other | Free | — |
| 7223.00 | Wire of stainless steel: | — | — |
| 7223.00.10 | Round wire | Free | — |
| 7223.00.50 | Flat wire | Free | — |
| 7223.00.90 | Other | Free | — |
| 7224 | Other alloy steel in ingots or other primary forms; semi-finished products of ot... | — | — |
| 7224.10.00 | Ingots and other primary forms | Free | — |
| 7224.90.00 | Other | Free | — |
| 7225 | Flat-rolled products of other alloy steel, of a width of 600 mm or more: | — | — |
| 7225.11.00 | Grain-oriented | Free | — |
| 7225.19.00 | Other | Free | — |
| 7225.30 | Other, not further worked than hot-rolled, in coils: | — | — |
| 7225.30.11 | Of tool steel | Free | — |
| 7225.30.30 | Other | Free | — |
| 7225.30.51 | Of tool steel | Free | — |
| 7225.30.70 | Other | Free | — |
| 7225.40 | Other, not further worked than hot-rolled, not in coils: | — | — |
| 7225.40.11 | Of tool steel | Free | — |
| 7225.40.30 | Other | Free | — |
| 7225.40.51 | Of tool steel | Free | — |
| 7225.40.70 | Other | Free | — |
| 7225.50 | Other, not further worked than cold-rolled (cold-reduced): | — | — |
| 7225.50.11 | Of tool steel | Free | — |
| 7225.50.60 | Of a thickness of 4.75 mm or more | Free | — |
| 7225.50.70 | Heat-resisting steel | Free | — |
| 7225.50.80 | Other | Free | — |
| 7225.91.00 | Electrolytically plated or coated with zinc | Free | — |
| 7225.92.00 | Otherwise plated or coated with zinc | Free | — |
| 7225.99.00 | Other | Free | — |
| 7226 | Flat-rolled products of other alloy steel, of a width of less than 600 mm: | — | — |
| 7226.11 | Grain-oriented: | — | — |
| 7226.11.10 | Of a width of 300 mm or more | Free | — |
| 7226.11.90 | Of a width of less than 300 mm | Free | — |
| 7226.19 | Other: | — | — |
| 7226.19.10 | Of a width of 300 mm or more | Free | — |
| 7226.19.90 | Of a width of less than 300 mm | Free | — |
| 7226.20.00 | Of high-speed steel | Free | — |
| 7226.91 | Not further worked than hot-rolled: | — | — |
| 7226.91.05 | Of chipper knife steel | Free | — |
| 7226.91.15 | Of a width of 300 mm or more | Free | — |
| 7226.91.25 | Of a width of less than 300 mm | Free | — |
| 7226.91.50 | Of a thickness of 4.75 mm or more | Free | — |
| 7226.91.70 | Of a width of 300 mm or more | Free | — |
| 7226.91.80 | Of a width of less than 300 mm | Free | — |
| 7226.92 | Not further worked than cold-rolled (cold-reduced): | — | — |
| 7226.92.10 | Of a width of 300 mm or more | Free | — |
| 7226.92.30 | Of a width of less than 300 mm | Free | — |
| 7226.92.50 | Of a width of 300 mm or more | Free | — |
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | Free | — |
| 7226.92.80 | Of a thickness exceeding 0.25 mm | Free | — |
| 7226.99.01 | Other | Free | — |
| 7227 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel: | — | — |
| 7227.10.00 | Of high-speed steel | Free | — |
| 7227.20.00 | Of silico-manganese steel | Free | — |
| 7227.90 | Other: | — | — |
| 7227.90.10 | Not tempered, not treated, and not partly manufactured | Free | — |
| 7227.90.20 | Other | Free | — |
| 7227.90.60 | Other | Free | — |
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other ... | — | — |
| 7228.10.00 | Bars and rods, of high-speed steel | Free | — |
| 7228.20 | Bars and rods, of silico-manganese steel: | — | — |
| 7228.20.10 | Not cold-formed | Free | — |
| 7228.20.50 | Cold-formed | Free | — |
| 7228.30 | Of tool steel (other than high-speed steel): | — | — |
| 7228.30.20 | Of ball-bearing steel | Free | — |
| 7228.30.40 | Of chipper knife steel, not cold-formed | Free | — |
| 7228.30.60 | Other | Free | — |
| 7228.30.80 | Other | Free | — |
| 7228.40.00 | Other bars and rods, not further worked than forged | Free | — |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished: | — | — |
| 7228.50.10 | Of tool steel (other than high-speed steel) | Free | — |
| 7228.50.50 | Other | Free | — |
| 7228.60 | Other bars and rods: | — | — |
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | — |
| 7228.60.60 | Not cold-formed | Free | — |
| 7228.60.80 | Cold-formed | Free | — |
| 7228.70 | Angles, shapes and sections: | — | — |
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | — |
| 7228.70.60 | Other | Free | — |
| 7228.80.00 | Hollow drill bars and rods | Free | — |
| 7229 | Wire of other alloy steel: | — | — |
| 7229.20.00 | Of silico-manganese steel | Free | — |
| 7229.90 | Other: | — | — |
| 7229.90.05 | Of high-speed steel | Free | — |
| 7229.90.10 | Flat wire | Free | — |
| 7229.90.50 | Round wire | Free | — |
| 7229.90.90 | Other wire | Free | — |
Guides & Resources
IEEPA Tariff Refund Calculator
Check if your imports qualify
Copper Tariff 2026: Section 232 Rates, Affected Products, and What Importers Need to Know
Importing From Taiwan: 2026 US Tariff Rates, Trade Deal & Customs Guide
Importing From Sri Lanka: 2026 US Tariff Rates, Duties & Customs Guide
Section 301 Investigation 2026: Every Country, Sector, and Deadline Importers Need to Know
CAPE Portal Filing Guide: How to Get Your IEEPA Tariff Refund in 2026
EU Combined Nomenclature (CN Codes): How the EU Classifies Imports and Why US Exporters Should Care
Customs Bond: Types, Costs, and How to Get One (2026 Guide)
Importer of Record (IOR): Responsibilities, Requirements, and How to Become One
Temporary Importation Under Bond (TIB): How It Works, What It Costs, and When to Use It
How to File for an IEEPA Tariff Refund After the Supreme Court Ruling
Importing from China: Complete Tariff and Compliance Guide
Trade Agreements: How to Qualify for Preferential Tariff Rates
Extension of Emergency Import Restrictions Imposed on Archaeological and Ethnological Material of Afghanistan
Tris (Hydroxymethyl) Aminomethane and Tris (Hydroxymethyl) Aminomethane Hydrochloride (“Tris and Tris HCI”) From China; Institution of Antidumping and Countervailing Duty Investigations and Scheduling of Preliminary Phase Investigations