France — Chapter 74: Chapter 74
US import tariff rates for Chapter 74 products originating from France.
Tariff Rates (121 codes)
| HTS Code | Description | General Rate | Preferential Rate |
|---|---|---|---|
| 7401.00.00 | Copper mattes; cement copper (precipitated copper) | Free | — |
| 7402.00.00 | Unrefined copper; copper anodes for electrolytic refining | Free | — |
| 7403 | Refined copper and copper alloys, unwrought (other than master alloys of heading... | — | — |
| 7403.11.00 | Cathodes and sections of cathodes | 1% | — |
| 7403.12.00 | Wire bars | 1% | — |
| 7403.13.00 | Billets | 1% | — |
| 7403.19.00 | Other | 1% | — |
| 7403.21.00 | Copper-zinc base alloys (brass) | 1% | — |
| 7403.22.00 | Copper-tin base alloys (bronze) | 1% | — |
| 7403.29.01 | Other copper alloys | 1% | — |
| 7404.00 | Copper waste and scrap: | — | — |
| 7404.00.30 | Spent anodes; waste and scrap with a copper content of less than 94 percent by w... | Free | — |
| 7404.00.60 | Other | Free | — |
| 7405.00 | Master alloys of copper: | — | — |
| 7405.00.10 | Containing by weight 5 percent or more but not more than 15 percent of phosphoru... | Free | — |
| 7405.00.60 | Other | Free | — |
| 7406 | Copper powders and flakes: | — | — |
| 7406.10.00 | Powders of non-lamellar structure | Free | — |
| 7406.20.00 | Powders of lamellar structure; flakes | Free | — |
| 7407 | Copper bars, rods and profiles: | — | — |
| 7407.10 | Of refined copper: | — | — |
| 7407.10.15 | Hollow profiles | 3% | — |
| 7407.10.30 | Other | 3% | — |
| 7407.10.50 | Bars and rods | 1% | — |
| 7407.21 | Of copper-zinc base alloys (brass): | — | — |
| 7407.21.15 | Hollow profiles | 2.2% | — |
| 7407.21.30 | Other | 2.2% | — |
| 7407.21.50 | Low fuming brazing rods | 2.2% | — |
| 7407.21.70 | Having a rectangular cross section | 1.9% | — |
| 7407.21.90 | Other | 2.2% | — |
| 7407.29 | Other: | — | — |
| 7407.29.16 | Hollow | 3% | — |
| 7407.29.34 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (n... | 3% | — |
| 7407.29.38 | Other | 3% | — |
| 7407.29.40 | Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc ... | 3% | — |
| 7407.29.50 | Other bars and rods | 1.6% | — |
| 7408 | Copper wire: | — | — |
| 7408.11 | Of which the maximum cross-sectional dimension exceeds 6 mm: | — | — |
| 7408.11.30 | With a maximum cross-sectional dimension over 9.5 mm | 1% | — |
| 7408.11.60 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | 3% | — |
| 7408.19.00 | Other | 3% | — |
| 7408.21.00 | Of copper-zinc base alloys (brass) | 3% | — |
| 7408.22 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (n... | — | — |
| 7408.22.10 | Coated or plated with metal | 3% | — |
| 7408.22.50 | Not coated or plated with metal | 3% | — |
| 7408.29 | Other: | — | — |
| 7408.29.10 | Coated or plated with metal | 3% | — |
| 7408.29.50 | Not coated or plated with metal | 3% | — |
| 7409 | Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: | — | — |
| 7409.11 | In coils: | — | — |
| 7409.11.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.11.50 | Of a thickness of less than 5 mm | 1% | — |
| 7409.19 | Other: | — | — |
| 7409.19.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.19.50 | Of a width of 500 mm or more | 1% | — |
| 7409.19.90 | Of a width of less than 500 mm | 3% | — |
| 7409.21.00 | In coils | 1.9% | — |
| 7409.29.00 | Other | 1.9% | — |
| 7409.31 | In coils: | — | — |
| 7409.31.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.31.50 | Of a width of 500 mm or more | 1.7% | — |
| 7409.31.90 | Of a width of less than 500 mm | 3% | — |
| 7409.39 | Other: | — | — |
| 7409.39.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.39.50 | Of a width of 500 mm or more | 1.7% | — |
| 7409.39.90 | Of a width of less than 500 mm | 3% | — |
| 7409.40.00 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (... | 3% | — |
| 7409.90 | Of other copper alloys: | — | — |
| 7409.90.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.90.50 | Of a width of 500 mm or more | 1.7% | — |
| 7409.90.90 | Of a width of less than 500 mm | 3% | — |
| 7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics o... | — | — |
| 7410.11.00 | Of refined copper | 1% | — |
| 7410.12.00 | Of copper alloys | 1% | — |
| 7410.21 | Of refined copper: | — | — |
| 7410.21.30 | Copper clad laminates | 3% | — |
| 7410.21.60 | Other | 1.5% | — |
| 7410.22.00 | Of copper alloys | 1.5% | — |
| 7411 | Copper tubes and pipes: | — | — |
| 7411.10 | Of refined copper: | — | — |
| 7411.10.10 | Seamless | 1.5% | — |
| 7411.10.50 | Other | 3% | — |
| 7411.21 | Of copper-zinc base alloys (brass): | — | — |
| 7411.21.10 | Seamless | 1.4% | — |
| 7411.21.50 | Other | 3% | — |
| 7411.22.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (n... | 3% | — |
| 7411.29 | Other: | — | — |
| 7411.29.10 | Seamless | 1.4% | — |
| 7411.29.50 | Other | 3% | — |
| 7412 | Copper tube or pipe fittings (for example couplings, elbows, sleeves): | — | — |
| 7412.10.00 | Of refined copper | 3% | — |
| 7412.20.00 | Of copper alloys | 3% | — |
| 7413.00 | Stranded wire, cables, plaited bands and the like, including slings and similar ... | — | — |
| 7413.00.10 | Stranded wire | 3% | — |
| 7413.00.50 | Other | 2% | — |
| 7413.00.90 | Fitted with fittings or made up into articles | 3% | — |
| 7415 | Nails, tacks, drawing pins, staples (other than those of heading 8305) and simil... | — | — |
| 7415.10.00 | Nails and tacks, drawing pins, staples and similar articles | 2.5% | — |
| 7415.21.00 | Washers (including spring washers) | 3% | — |
| 7415.29.00 | Other | 3% | — |
| 7415.33 | Screws, bolts and nuts: | — | — |
| 7415.33.05 | Screws for wood | 3% | — |
| 7415.33.10 | Muntz or yellow metal bolts | 1.4% | — |
| 7415.33.80 | Other screws and bolts; nuts | 3% | — |
| 7415.39.00 | Other | 3% | — |
| 7418 | Table, kitchen or other household articles and parts thereof, of copper; pot sco... | — | — |
| 7418.10.00 | Table, kitchen or other household articles and parts thereof; pot scourers and s... | 3% | — |
| 7418.20 | Sanitary ware and parts thereof: | — | — |
| 7418.20.10 | Of copper-zinc base alloys (brass) | 3% | — |
| 7418.20.50 | Other | 3% | — |
| 7419 | Other articles of copper: | — | — |
| 7419.20.00 | Cast, molded, stamped or forged, but not further worked | Free | — |
| 7419.80 | Other: | — | — |
| 7419.80.03 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machine... | Free | — |
| 7419.80.06 | Other | 3% | — |
| 7419.80.09 | Other | 3% | — |
| 7419.80.15 | Containers of a kind normally carried on the person, in the pocket or in the han... | 3% | — |
| 7419.80.16 | Copper springs | 3% | — |
| 7419.80.17 | Chain and parts thereof | 3% | — |
| 7419.80.30 | Coated or plated with precious metal | 3% | — |
| 7419.80.50 | Other | Free | — |
Guides & Resources
IEEPA Tariff Refund Calculator
Check if your imports qualify
Section 301 Investigation 2026: Every Country, Sector, and Deadline Importers Need to Know
CAPE Portal Filing Guide: How to Get Your IEEPA Tariff Refund in 2026
EU Combined Nomenclature (CN Codes): How the EU Classifies Imports and Why US Exporters Should Care
Customs Bond: Types, Costs, and How to Get One (2026 Guide)
Importer of Record (IOR): Responsibilities, Requirements, and How to Become One
Temporary Importation Under Bond (TIB): How It Works, What It Costs, and When to Use It
How to File for an IEEPA Tariff Refund After the Supreme Court Ruling
Importing from China: Complete Tariff and Compliance Guide
Trade Agreements: How to Qualify for Preferential Tariff Rates
Understanding Section 301, 232, and 201 Tariffs
Complete Guide to US Import Duties and Customs Fees
How to Find Your HTS Code: A Step-by-Step Guide
Extension of Emergency Import Restrictions Imposed on Archaeological and Ethnological Material of Afghanistan
Tris (Hydroxymethyl) Aminomethane and Tris (Hydroxymethyl) Aminomethane Hydrochloride (“Tris and Tris HCI”) From China; Institution of Antidumping and Countervailing Duty Investigations and Scheduling of Preliminary Phase Investigations