Morocco — Chapter 74: Chapter 74
US import tariff rates for Chapter 74 products originating from Morocco.
Tariff Rates (121 codes)
| HTS Code | Description | General Rate | Preferential Rate |
|---|---|---|---|
| 7401.00.00 | Copper mattes; cement copper (precipitated copper) | Free | — |
| 7402.00.00 | Unrefined copper; copper anodes for electrolytic refining | Free | — |
| 7403 | Refined copper and copper alloys, unwrought (other than master alloys of heading... | — | — |
| 7403.11.00 | Cathodes and sections of cathodes | 1% | — |
| 7403.12.00 | Wire bars | 1% | — |
| 7403.13.00 | Billets | 1% | — |
| 7403.19.00 | Other | 1% | — |
| 7403.21.00 | Copper-zinc base alloys (brass) | 1% | — |
| 7403.22.00 | Copper-tin base alloys (bronze) | 1% | — |
| 7403.29.01 | Other copper alloys | 1% | — |
| 7404.00 | Copper waste and scrap: | — | — |
| 7404.00.30 | Spent anodes; waste and scrap with a copper content of less than 94 percent by w... | Free | — |
| 7404.00.60 | Other | Free | — |
| 7405.00 | Master alloys of copper: | — | — |
| 7405.00.10 | Containing by weight 5 percent or more but not more than 15 percent of phosphoru... | Free | — |
| 7405.00.60 | Other | Free | — |
| 7406 | Copper powders and flakes: | — | — |
| 7406.10.00 | Powders of non-lamellar structure | Free | — |
| 7406.20.00 | Powders of lamellar structure; flakes | Free | — |
| 7407 | Copper bars, rods and profiles: | — | — |
| 7407.10 | Of refined copper: | — | — |
| 7407.10.15 | Hollow profiles | 3% | — |
| 7407.10.30 | Other | 3% | — |
| 7407.10.50 | Bars and rods | 1% | — |
| 7407.21 | Of copper-zinc base alloys (brass): | — | — |
| 7407.21.15 | Hollow profiles | 2.2% | — |
| 7407.21.30 | Other | 2.2% | — |
| 7407.21.50 | Low fuming brazing rods | 2.2% | — |
| 7407.21.70 | Having a rectangular cross section | 1.9% | — |
| 7407.21.90 | Other | 2.2% | — |
| 7407.29 | Other: | — | — |
| 7407.29.16 | Hollow | 3% | — |
| 7407.29.34 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (n... | 3% | — |
| 7407.29.38 | Other | 3% | — |
| 7407.29.40 | Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc ... | 3% | — |
| 7407.29.50 | Other bars and rods | 1.6% | — |
| 7408 | Copper wire: | — | — |
| 7408.11 | Of which the maximum cross-sectional dimension exceeds 6 mm: | — | — |
| 7408.11.30 | With a maximum cross-sectional dimension over 9.5 mm | 1% | — |
| 7408.11.60 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | 3% | — |
| 7408.19.00 | Other | 3% | — |
| 7408.21.00 | Of copper-zinc base alloys (brass) | 3% | — |
| 7408.22 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (n... | — | — |
| 7408.22.10 | Coated or plated with metal | 3% | — |
| 7408.22.50 | Not coated or plated with metal | 3% | — |
| 7408.29 | Other: | — | — |
| 7408.29.10 | Coated or plated with metal | 3% | — |
| 7408.29.50 | Not coated or plated with metal | 3% | — |
| 7409 | Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: | — | — |
| 7409.11 | In coils: | — | — |
| 7409.11.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.11.50 | Of a thickness of less than 5 mm | 1% | — |
| 7409.19 | Other: | — | — |
| 7409.19.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.19.50 | Of a width of 500 mm or more | 1% | — |
| 7409.19.90 | Of a width of less than 500 mm | 3% | — |
| 7409.21.00 | In coils | 1.9% | — |
| 7409.29.00 | Other | 1.9% | — |
| 7409.31 | In coils: | — | — |
| 7409.31.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.31.50 | Of a width of 500 mm or more | 1.7% | — |
| 7409.31.90 | Of a width of less than 500 mm | 3% | — |
| 7409.39 | Other: | — | — |
| 7409.39.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.39.50 | Of a width of 500 mm or more | 1.7% | — |
| 7409.39.90 | Of a width of less than 500 mm | 3% | — |
| 7409.40.00 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (... | 3% | — |
| 7409.90 | Of other copper alloys: | — | — |
| 7409.90.10 | Of a thickness of 5 mm or more | 3% | — |
| 7409.90.50 | Of a width of 500 mm or more | 1.7% | — |
| 7409.90.90 | Of a width of less than 500 mm | 3% | — |
| 7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics o... | — | — |
| 7410.11.00 | Of refined copper | 1% | — |
| 7410.12.00 | Of copper alloys | 1% | — |
| 7410.21 | Of refined copper: | — | — |
| 7410.21.30 | Copper clad laminates | 3% | — |
| 7410.21.60 | Other | 1.5% | — |
| 7410.22.00 | Of copper alloys | 1.5% | — |
| 7411 | Copper tubes and pipes: | — | — |
| 7411.10 | Of refined copper: | — | — |
| 7411.10.10 | Seamless | 1.5% | — |
| 7411.10.50 | Other | 3% | — |
| 7411.21 | Of copper-zinc base alloys (brass): | — | — |
| 7411.21.10 | Seamless | 1.4% | — |
| 7411.21.50 | Other | 3% | — |
| 7411.22.00 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (n... | 3% | — |
| 7411.29 | Other: | — | — |
| 7411.29.10 | Seamless | 1.4% | — |
| 7411.29.50 | Other | 3% | — |
| 7412 | Copper tube or pipe fittings (for example couplings, elbows, sleeves): | — | — |
| 7412.10.00 | Of refined copper | 3% | — |
| 7412.20.00 | Of copper alloys | 3% | — |
| 7413.00 | Stranded wire, cables, plaited bands and the like, including slings and similar ... | — | — |
| 7413.00.10 | Stranded wire | 3% | — |
| 7413.00.50 | Other | 2% | — |
| 7413.00.90 | Fitted with fittings or made up into articles | 3% | — |
| 7415 | Nails, tacks, drawing pins, staples (other than those of heading 8305) and simil... | — | — |
| 7415.10.00 | Nails and tacks, drawing pins, staples and similar articles | 2.5% | — |
| 7415.21.00 | Washers (including spring washers) | 3% | — |
| 7415.29.00 | Other | 3% | — |
| 7415.33 | Screws, bolts and nuts: | — | — |
| 7415.33.05 | Screws for wood | 3% | — |
| 7415.33.10 | Muntz or yellow metal bolts | 1.4% | — |
| 7415.33.80 | Other screws and bolts; nuts | 3% | — |
| 7415.39.00 | Other | 3% | — |
| 7418 | Table, kitchen or other household articles and parts thereof, of copper; pot sco... | — | — |
| 7418.10.00 | Table, kitchen or other household articles and parts thereof; pot scourers and s... | 3% | — |
| 7418.20 | Sanitary ware and parts thereof: | — | — |
| 7418.20.10 | Of copper-zinc base alloys (brass) | 3% | — |
| 7418.20.50 | Other | 3% | — |
| 7419 | Other articles of copper: | — | — |
| 7419.20.00 | Cast, molded, stamped or forged, but not further worked | Free | — |
| 7419.80 | Other: | — | — |
| 7419.80.03 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machine... | Free | — |
| 7419.80.06 | Other | 3% | — |
| 7419.80.09 | Other | 3% | — |
| 7419.80.15 | Containers of a kind normally carried on the person, in the pocket or in the han... | 3% | — |
| 7419.80.16 | Copper springs | 3% | — |
| 7419.80.17 | Chain and parts thereof | 3% | — |
| 7419.80.30 | Coated or plated with precious metal | 3% | — |
| 7419.80.50 | Other | Free | — |
Guides & Resources
IEEPA Tariff Refund Calculator
Check if your imports qualify
Copper Tariff 2026: Section 232 Rates, Affected Products, and What Importers Need to Know
Importing From Taiwan: 2026 US Tariff Rates, Trade Deal & Customs Guide
Importing From Sri Lanka: 2026 US Tariff Rates, Duties & Customs Guide
Section 301 Investigation 2026: Every Country, Sector, and Deadline Importers Need to Know
CAPE Portal Filing Guide: How to Get Your IEEPA Tariff Refund in 2026
EU Combined Nomenclature (CN Codes): How the EU Classifies Imports and Why US Exporters Should Care
Customs Bond: Types, Costs, and How to Get One (2026 Guide)
Importer of Record (IOR): Responsibilities, Requirements, and How to Become One
Temporary Importation Under Bond (TIB): How It Works, What It Costs, and When to Use It
How to File for an IEEPA Tariff Refund After the Supreme Court Ruling
Importing from China: Complete Tariff and Compliance Guide
Trade Agreements: How to Qualify for Preferential Tariff Rates
Extension of Emergency Import Restrictions Imposed on Archaeological and Ethnological Material of Afghanistan
Tris (Hydroxymethyl) Aminomethane and Tris (Hydroxymethyl) Aminomethane Hydrochloride (“Tris and Tris HCI”) From China; Institution of Antidumping and Countervailing Duty Investigations and Scheduling of Preliminary Phase Investigations